Full Description
View Full Description
Ashdown ABM-EVO IV 300w Bass Head
A new classic
Back to the forefront. The fourth iteration of a classic that has held its place on the main stage for over 22 years and is now back in a feature-laden lower wattage model. Nowadays you really don’t need a huge amp to take around anymore - Ashdown reimaged a veteran.
Ashdown’s signature snarl
Delivering everything from snarling saturation drenched in sustain to rich, supreme cleans. The new ABM-EVO pushes more current through the 12AX7 which gives complex and lush harmonics with the use of a footswitch.
Sophisticated nine-band EQ
Bass, middle, and treble are the heart of the tone control, but the ABM-EVO IV has an extra six sliders that fit either side of the mid-range. This gives you incredible manipulation of your tone if you need it, and if you don’t you can turn the E.Q off altogether.
A huge array of features
The ABM-EVO IV has an extensive feature set that allows it to be used with a huge array of genres. The one knob sub-harmonic synth, the drive and the dynamic compressor can be engaged by a footswitch. Adding colossal Godzilla-like bottom end that can turn a stage to rubble was just a case of hitting a footswitch. for harmonic destruction. But this can achieve so much more, covering a spectrum from country plonk, tight compressed funk and classic rock grind – the ABM-EVO is a chameleon of tone, able to adapt where ever you put it and never seeming out of place.
Features/Specifications
- Power Output: 300 Watts
- Power Requirement: 115 - 230 Volts
- Speaker Outputs: 4 x Jack/Speakon outputs
- Frequency Response: -3dB an 17Hz und 30kHz
- High Instrument Input: Impedance 3.9m Ohm, input range 150mV -
- Low Instrument Input: Impedance - 10k ohms Input range 300mv to 40v p - p
- Line Input: Impedance 22k Ohms / Input level 0dBu nominal
- DI Output: 600 Ohms balanced / Level -20dBu nominal With Ground Lift
- Tuner Output: Impedance 22k Ohms, level 0dBu nominal
- Impedance: Minimum 4 Ohms
- Effects Send: impedance 22k Ohm, Level 0dBu nominal
- Effects Return: impedance 22k Ohms, Input Level 0dBu Nominal
- Pre-Amp Tubes: 1 x 12AX7
- H x W x D (mm): 134 x 474 x 320
- Weight (kg): 15